UP1.8 Server List

[Tblaster]

http://il2ultrapack.net46.net/index.php/board,49.0.html

[Tiger]

S!~ Tblaster,

I have a question for you. Is the server software and client software the same? I clicked on the UP 1.8 Server link and it took me to the full download. My guess is that I install UP 1.8 basically the same way as the AAA UI, meaning that I install UP 1.8 client to my 4.09m server and use the JSGME to activate the various MODS. Is this correct?

[Razgriz_37]

=S=


If I may add, we've recently joined Medar's Server which runs a CRT=2 test.

With the organization of the JSGME, it make mods switching very easy, so if Medar's server had a diagram of his enabled mods or show us what he has on his JSGME, we would have to match everything as far as I know. I couldn't use the other 6DOF mods that a choice I had to use the one he specifically had. That gives you an Idea of how accurate you have to be with the mods.

Medar jump in here at anytime...

[YOKE]

you do have to run the client side with the same choices as the host side... this I believe is to be true...

BUT.....


even with crt=2 on there are a few mods that can be run without getting the boot..... this is from a post at the FS forums.....

FS has certain mods that need enabled....

also they say you can run .....

perfect maps

h+p platinum effects or full josse clouds ( just NOT BOTH at the same time )

and small fonts.


also in medars server today I have the smoke and fire effects on and didnt get booted.

[Medar]

Yoke is absolutely correct. I have CRT=1 enabled on the practice box, which is supposed to be a "cursory" check of the files...but Ultrapack 1.8 enforces certain options of its own outside of the CheckRuntime variable.

I don't know the 'extra' mods you can enable...but common sense dictates they will be related to graphics and that's about it.

[Tblaster]

I have a question for you. Is the server software and client software the same? I clicked on the UP 1.8 Server link and it took me to the full download. My guess is that I install UP 1.8 basically the same way as the AAA UI, meaning that I install UP 1.8 client to my 4.09m server and use the JSGME to activate the various MODS. Is this correct?

Same download goes to mkae both the server and the client. When you install, there is a radio button to check for client vs. server.

Yes, use JSGME to manage the mods.

Hope that answers the mail.